I was just thinking about Windows 7 to 10 migration before I get into interfacing. I have seen some inexpensive options using memory stick with upgrade file on it that should accept your current key but in our case I wonder if it wouldn’t be safer to go with a fresh install rather than update. I was just thinking about Windows 7 to 10 migration before I get into interfacing. I have seen some inexpensive options using memory stick with upgrade file on it that should accept your current key but in our case I wonder if it wouldn’t be safer to go with a fresh install rather than update. I would definitly go for a fresh install. I would definitly go for a fresh install. Well here is something to celebrate. The just released Lockheed Martin 'chat' at FSElite talking about the upcoming Version 5 of P3D. I will quote the salient points Additionally, the backing data in this weather system will allow new capabilities like high-fidelity weather radars to be created. By default, v5 does not offer real-world weather, however, our Software Development Kit (SDK) supports all the required interfaces to permit integration of real-world weather. We look forward to seeing what third parties create using our open architecture. In addition, backwards compatibility is very important to us. Damn it. a fight between P3Dv5 and FS2020. I can see three 4K projectors needing to be budgetted for ! I can see them in the divorce settlement now. Exciting times ahead and us Learjet-ers are in the box seat. I've told you many times before. we can land where the big guys can't, which drastically increases the available airports. A WX radar would be a lovely addition now that we've been given a chance, at least with P3D. A maximum ceiling of about 51,000 ft is alot of weather to utilise the radar. Bring it on. Cheers Mark S. Well here is something to celebrate. The just released Lockheed Martin 'chat' at FSElite talking about the upcoming Version 5 of P3D. I will quote the salient points Additionally, the backing data in this weather system will allow new capabilities like high-fidelity weather radars to be created. By default, v5 does not offer real-world weather, however, our Software Development Kit (SDK) supports all the required interfaces to permit integration of real-world weather. We look forward to seeing what third parties create using our open architecture. In addition, backwards compatibility is very important to us. Damn it. a fight between P3Dv5 and FS2020. I can see three 4K projectors needing to be budgetted for ! I can see them in the divorce settlement now. Exciting times ahead and us Learjet-ers are in the box seat. I've told you many times before. we can land where the big guys can't, which drastically increases the available airports. A WX radar would be a lovely addition now that we've been given a chance, at least with P3D. A maximum ceiling of about 51,000 ft is alot of weather to utilise the radar. Bring it on. Cheers Mark S. By default, v5 does not offer real-world weather, however, our Software Development Kit (SDK) supports all the required interfaces to permit integration of real-world weather. We look forward to seeing what third parties create using our open architecture. Wasn't this the case in v4.6 allready?? By default, v5 does not offer real-world weather, however, our Software Development Kit (SDK) supports all the required interfaces to permit integration of real-world weather. We look forward to seeing what third parties create using our open architecture. Wasn't this the case in v4.6 allready??WX Radar Request Discussion
Upgrading is possible, but you will upgrade windows 7 legacy with it.
It's better to install a clean W10 .
After this W10 semi annual updates will be no problem.
Upgrading is possible, but you will upgrade windows 7 legacy with it.
It's better to install a clean W10 .
After this W10 semi annual updates will be no problem.
SimConnect_WeatherCreateThermal
Used to create a thermal at a specific location.
SimConnect_WeatherRemoveStation
Used to remove a weather station.
SimConnect_WeatherRemoveThermal
Used to remove a thermal.
SimConnect_WeatherRequestCloudState
Used to request cloud density information on a given area.
SimConnect_WeatherRequestInterpolatedObservation
Used to send a request for weather data that is interpolated from the weather at the nearest weather stations.
SimConnect_WeatherRequestObservationAtNearestStation
Used to send a request for the weather data from the weather station nearest to the specified lat/lon position.
SimConnect_WeatherRequestObservationAtStation
Used to send a request for the weather data from a weather station identified by its ICAO code.
SimConnect_WeatherSetDynamicUpdateRate
Used to set the rate at which cloud formations change.
SimConnect_WeatherSetModeCustom
Used to set the weather mode to user-defined.
SimConnect_WeatherSetModeGlobal
Used to set the weather mode to global, so the same weather data is used everywhere.
SimConnect_WeatherSetModeServer
Deprecated.
SimConnect_WeatherSetModeTheme
Used to set the weather mode to a particular theme.
SimConnect_WeatherSetObservation
Used to set the weather at a specific weather station, identified from within the Metar data string
SimConnect_WeatherCreateThermal
Used to create a thermal at a specific location.
SimConnect_WeatherRemoveStation
Used to remove a weather station.
SimConnect_WeatherRemoveThermal
Used to remove a thermal.
SimConnect_WeatherRequestCloudState
Used to request cloud density information on a given area.
SimConnect_WeatherRequestInterpolatedObservation
Used to send a request for weather data that is interpolated from the weather at the nearest weather stations.
SimConnect_WeatherRequestObservationAtNearestStation
Used to send a request for the weather data from the weather station nearest to the specified lat/lon position.
SimConnect_WeatherRequestObservationAtStation
Used to send a request for the weather data from a weather station identified by its ICAO code.
SimConnect_WeatherSetDynamicUpdateRate
Used to set the rate at which cloud formations change.
SimConnect_WeatherSetModeCustom
Used to set the weather mode to user-defined.
SimConnect_WeatherSetModeGlobal
Used to set the weather mode to global, so the same weather data is used everywhere.
SimConnect_WeatherSetModeServer
Deprecated.
SimConnect_WeatherSetModeTheme
Used to set the weather mode to a particular theme.
SimConnect_WeatherSetObservation
Used to set the weather at a specific weather station, identified from within the Metar data string
2017-10-10