Forum Navigation
Please or Register to create posts and topics.

Combo RMU's and DU's For Sale!

(Original thread started on 10-24-16 by Mark L.)

Watch for my RMU's/DU's available for sale. Not available separately due to it's custom configuration. They operate with a single PoKeys Ethernet card and my software (a modified version of the RMU version) that handles all of it and it's all plug and play. The only reason I won't release it just yet, is I'm having a factory made interface board produced to replace my prototype. This is a design co-developed by Vince and myself that tested and worked out great, but due to whatever reason Vince dropping out of the picture producing the RMU's and DU's halted production. Note! This is a one off setup, I will not be making more of these.

 

There was or should be a thread on the 'Global Avionics' board when we were building this. Software is mentioned also on my website Markdidit.com

 

Also, need spare monitors or just want them? These were hard to locate in the day, especially the center one that mounted vertically. Mine are for sale:

Markl 1

 

I have a fully functional set of RMU's and DU's with my custom Avionics Interface board (includes the PoKeys 57E) a completely Plug n Play setup available for sale. $1650.00 *Reduced!*

 

Pokeys Card requires a network connection and 5v dc power source.

Software for the Avionics board is available to download off my website.

 

Nothing to program, connect everything up, load and start the software, do the initial Save and click Run. This runs the RMU's and DU's and can optionally handle the Master Warning led and Caution switch.

 

I also have 2 additional Avionics boards available for sale. I had 3 made, the two left are: $125 without PoKeys 57E or $185 with:

Markl 2

 

Fire Sale on the 2 Avionics interface boards for Vince made RMU's. $50 each no PoKeys card, board components provided but must be soldered on by the buyer.

 

(Posted by Will Sasse on 02-14-17)

Hi Mark, I'll take one of those, thank you.... I'm back!

 

(Posted by Mark L. on 02-15-17)

One of them is yours! PM replied to!

Still for sale!!

I have a fully functional set of RMU's and DU's with my custom Avionics Interface board (includes the PoKeys 57E) a completely Plug n Play setup available for sale. $800.00 *Reduced!*

Pokeys Card requires a network connection and 5v dc power source.

Software for the Avionics board is available to download off my website.

Nothing to program, connect everything up, load and start the software, do the initial Save and click Run. This runs the RMU's and DU's

Everything in the pic of the previous post is available, make offer.

 

Mark

 

Hi Mark, what's your email address?

Sorry, didn't see this until now.  mark@markdidit.com should work.

 

Mark

These are still for sale and available, make offer?

 

Mark

markl@markdidit.com